The following is a list of products I can offer.  Schwing Bioset has been a leader in the field of moving "hard to move" material of all kinds for many years and I am proud to work with them.  Feel free to contact me with any questions or concerns.

Vertical / Horizontal Plane

Schwing Bioset pumps can be configured in either a vertical place (material cylinder located above each other in the same vertical plane) or in the horizontal plane (material cylinders located next to each other in the same horizontal plane) depending on the arrangement that best suits the application.

Poppets

Schwing Bioset employs the use of a Poppet Valve on a piston pump when slurries and compressible materials are being pumped.  The poppet valve isolates the pump from the pipeline at the completion of a pumping stroke and prevents material from back-flowing into the pump and decreasing its efficiency.

Rock Valve

No other sequencing valve combines lowest cost per yard maintenance costs and ease of rebuilding as the Rock Valve. With over twenty years of development and field-tested toughness, the Rock Valve from Schwing remains the most effective valve available on the market for uncompressible materials.

Hydraulic Power Packs

Schwing Bioset’s piston pumps are operated via a hydraulic power pack and controlled by variable displacement hydraulic pumps.  No VFD’s are required for Schwing Bioset pumping systems as the pump speed is controlled by the variable displacement of the hydraulic pump.  In fact, the pumps are even switched hydraulically which has proven over the years to be an extremely reliable design, especially since the piston pumps are typically installed in harsh wastewater plant environments.

Sludge Flow Measuring System (SFMS™)

Schwing Bioset offers a patented SFMS that measures to within +/-5% the volume of material pumped.  SFMS is also a valuable diagnostic tool as it allows the Operators to continuously monitor the performance of the pump and schedule maintenance intervals only when necessary.

Maintenance

Maintenance on Schwing Bioset piston pumps is a simple task.  Common wear items include the pumping rams and the poppet discs and seats for a pump equipped with a Poppet valve, and the kidney seal and cutting ring assembly for a pump equipped with a Rock valve.  The components can typically be replaced in less than 4 hours.

Pipeline Lubrication System

Schwing Bioset’s pipeline lubrication system has proven to significantly reduce pipeline pressure for the material being pumped.  The lubricating fluids provide a uniform thin film that separates viscous and sticky materials from the inner wall of the pipeline and effectively lowers the pipeline friction loss and pipeline operating pressure.  In some cases the pressures are reduced in excess of 50%.

Reducing the operating pressure makes it possible to increase the pumping distance while at the same time reducing the operation and maintenance costs.

A continuous annular ring evenly introduces lubricating fluid in the direction of material flow around the inner wall of the pipeline.  This design limits the penetration of the lubricating fluid into viscous materials maximizing the lubricating effect while minimizing the amount of fluid that must be added to a dewatered material.  Pipeline Lubrication Systems can utilize water, oil, or polymer as the lubricating agent.

Controls

Schwing Bioset provides controls for our equipment that will serve as the primary control panel, or simply integrate into the Customers master control system and function only in a ‘local’ mode.  Controls will include the Customers preferred PLC’s, HMI’s, and programming software and can be designed to any NEMA or IP requirements.